-
ONE-MIRA MHINDURO
Anokurudzira-siyana kukura, isu kuvaka ukama hwakanaka nengetani fekitari, webbing nezvipfuramabwe fekitari, chisimudziso nechigumbuso fekitari, mutoro binders fekitari uye Stainless simbi zvigadzirwa fekitari, nechokwadi zvinodiwa zvakasiyana dzedu nemakasitoma pamwe hwakanakisisa uye zvemakwikwi mutengo. -
20 MAKORE ZVAKAITIKA
Tiri Rigging indasitiri kwemakore makumi maviri nemaviri. Tiri dzakanakira mubatanidzwa stocking, sourcing, kavha, ukoshi akawedzera basa. Kupa yepamusoro mutengo inoshanda mhinduro yakadekara kwako nomumwe zvinodiwa. -
yemhando yepamusoro
"Quality First, Customer Chikuru", isu nechokwadi chigadzirwa ose zvakaitika kukurukura kuongorora. Tinoedza nepatinogona napo kupa yemhando yepamusoro pamwe zvemakwikwi mutengo. kuchengeteka wako nehanya kwedu.
Linyi Thunder Rigging CO., Ltd rakaumbwa muna 1998, iri Linyi City, Shandong Province. fekitari yedu iri specialized mudzinza Rigging Hardware, isu kupa paupamhi neeSultan mishonga, akadai waya netambo clip, nengetani, turnbuckles, nezvikorekedzo, nezvindori, thimbles, maoko uye saka on.Focus pamusoro-siyana kukura, isu kuvaka ukama hwakanaka nengetani fekitari, webbing nezvipfuramabwe fekitari, chisimudziso nechigumbuso fekitari, mutoro binders fekitari uye Stainless simbi zvigadzirwa fekitari, nechokwadi zvinodiwa zvakasiyana dzedu nemakasitoma pamwe hwakanakisisa uye zvemakwikwi mutengo.


-
Use method and precautions of chain and c...20-09-151. Before use, the working load and applicable scope of the chain rigging shall be clearly seen on the label. Overload use is strictly prohibited, and visual inspection of the chain rigging shall be carried out before use. 2. In normal operation, the hoisting Angle is the key affecting the load. The included Angle of the shadow part in the figure should not exceed 120 degrees at most, otherwise it will cause local overload of the chain rigging. 3. It is forbidden to use informal link between ...
-
Requirements for sling construction site20-09-011. The construction site shall be equipped with enough spare slings of various sizes, which shall be hung at the specified place and put back to its original place after use. 2. Safety working load should be marked on the lute head of the sling, and the insertion rope sleeve should not be used. 3. Make a rope sleeve with a rope clip. The size of the rope clip must be in accordance with the size of the wire rope. 4. All spallers (including lifting rope, lifting lugs and sh...