장비 하드웨어 전문가

20 년 제조 경험

린이 천둥 리깅은 CO., 회사는 린이시, 산 동성에 위치한 1998 년에 설립되었습니다. 저희 공장은 하드웨어 장비의 라인 전문입니다, 우리는 와이어 로프 클립, 족쇄, 턴버클, 후크, 반지, 골무, 소매 및 다양한 개발에 이렇게 on.Focus 같은 제품의 넓은 범위를 제공, 우리는 좋은 관계를 구축 체인 공장, 웨빙 슬링 공장, 풀리 블록 공장, 부하 바인더 공장과 스테인레스 스틸 제품 공장과 함께 최고의 품질과 경쟁력있는 가격으로 고객의 다양한 요구를 보장합니다.

 

자세한 내용을

뉴스 & 이벤트

우리에
  • Key points to be mastered when lifting la...
    20-07-04
    For the hoisting or assembly of large workpiece, the factors such as large tonnage, complex shape, expensive value and multi-person collaboration further enhance the operation difficulty and risk factors. Therefore, when lifting large workpiece with rigging, the following points should be mastered: 1. Observe the shape of the workpiece before the operation, grasp the center of gravity position of the workpiece, and determine the weight of the workpiece according to the drawing. 2. Correctly s...
  • Notes for lifting large workpiece with ri...
    20-06-24
    For the hoisting of large workpiece, the factors such as large tonnage, complex shape, high value and multi-person cooperation further enhance the operation difficulty and risk factors. Therefore, when lifting large workpiece with rigging, the following points should be mastered: 1. Observe the shape of the workpiece before the operation, grasp the center of gravity position of the workpiece, and determine the weight of the workpiece according to the drawing. Proper selection of rope, shackle...
  • How to oil the rigging of the wire rope
    20-06-16
    Due to the harsh environment of rope rigging, it will lead to corrosion and wear. Therefore, lubrication should be carried out regularly in the process of production and use, which can effectively extend the service life. First, the core oil, surface oil and rope surface oil should be treated during production. Rope core immersion oil is an important work in the production of rope rope. The rope core should be carefully dried to water before immersion oil, and the rope core oil content should...
  • Should rigging be ductile?
    Should rigging be ductile?
    20-06-04
    Rigging is more commonly seen in wire rope fittings, mainly used for hoisting, traction and tension, etc., because of its high strength and toughness, it has been well received. But should rigging be ductile? So let’s talk about this a little bit. First of all, everything is malleable, it’s just the difference of the extension curve, but let’s use the technical term here, which is the tensile stress curve. As a tool, we first need to ensure that the elastic stress range is n...
  • Proper use of sling and precautions
    20-05-26
    ● should be familiar with all kinds of sling and its end parts of the performance, use precautions, scrap standards. ● the sling should be used in accordance with the shape characteristics and specific requirements of the workpiece to be hoisted, in the absence of conditions for use, must not be used. ● before the operation, the sling and its accessories should be checked and confirmed to be in good condition before use. ● before hanging, should be correctly selected hanging point, before lif...
자세한 내용을
WhatsApp에 온라인 채팅!