Фалшифициране на хардуер ЕКСПЕРТ

20 години производствен опит

за нас

добре дошли

Лини Thunder окачено CO., Ltd е основана през 1998 г., се намира в Лини Сити, провинция Шандонг. Нашата фабрика е специализирана в линията на такелажа хардуер, ние доставяме широки диапазони на продукти, като стоманено въже клипове, окови, обтегачи, куки, халки, напръстници, муфи и др on.Focus на диверсифицирано развитие, ние изграждаме добрите отношения с вериги фабрика, ремъци сапани фабрика, ролка блок фабрика, натоварване свързващи фабрика и продукти от неръждаема стомана фабрика, за да се гарантира на различните нужди на нашите клиенти с най-добро качество и конкурентни цени.

 

Прочетете още

новини и събития

в нас
  • Key points to be mastered when lifting la...
    20-07-04
    For the hoisting or assembly of large workpiece, the factors such as large tonnage, complex shape, expensive value and multi-person collaboration further enhance the operation difficulty and risk factors. Therefore, when lifting large workpiece with rigging, the following points should be mastered: 1. Observe the shape of the workpiece before the operation, grasp the center of gravity position of the workpiece, and determine the weight of the workpiece according to the drawing. 2. Correctly s...
  • Notes for lifting large workpiece with ri...
    20-06-24
    For the hoisting of large workpiece, the factors such as large tonnage, complex shape, high value and multi-person cooperation further enhance the operation difficulty and risk factors. Therefore, when lifting large workpiece with rigging, the following points should be mastered: 1. Observe the shape of the workpiece before the operation, grasp the center of gravity position of the workpiece, and determine the weight of the workpiece according to the drawing. Proper selection of rope, shackle...
  • How to oil the rigging of the wire rope
    20-06-16
    Due to the harsh environment of rope rigging, it will lead to corrosion and wear. Therefore, lubrication should be carried out regularly in the process of production and use, which can effectively extend the service life. First, the core oil, surface oil and rope surface oil should be treated during production. Rope core immersion oil is an important work in the production of rope rope. The rope core should be carefully dried to water before immersion oil, and the rope core oil content should...
  • Should rigging be ductile?
    Should rigging be ductile?
    20-06-04
    Rigging is more commonly seen in wire rope fittings, mainly used for hoisting, traction and tension, etc., because of its high strength and toughness, it has been well received. But should rigging be ductile? So let’s talk about this a little bit. First of all, everything is malleable, it’s just the difference of the extension curve, but let’s use the technical term here, which is the tensile stress curve. As a tool, we first need to ensure that the elastic stress range is n...
  • Proper use of sling and precautions
    20-05-26
    ● should be familiar with all kinds of sling and its end parts of the performance, use precautions, scrap standards. ● the sling should be used in accordance with the shape characteristics and specific requirements of the workpiece to be hoisted, in the absence of conditions for use, must not be used. ● before the operation, the sling and its accessories should be checked and confirmed to be in good condition before use. ● before hanging, should be correctly selected hanging point, before lif...
Прочетете още
WhatsApp онлайн чат!