RIGGING HARDWARE EXPERT

20 Tahun Manufaktur Pengalaman

tentang kami

Selamat datang

Linyi Guntur Rigging CO., Ltd didirikan pada tahun 1998, terletak di Kota Linyi, Provinsi Shandong. Pabrik kami khusus dalam garis tali-temali hardware, kami menyediakan rentang macam produk, seperti klip tali kawat, belenggu, turnbuckles, kait, cincin, bidal, lengan dan sebagainya on.Focus pada pengembangan diversifikasi, kita membangun hubungan yang baik dengan pabrik rantai, anyaman sling pabrik, blok pabrik katrol, beban pengikat pabrik dan pabrik produk stainless steel, untuk memastikan kebutuhan yang berbeda dari klien kami dengan kualitas terbaik dan harga yang kompetitif.

 

Baca lebih lajut

berita dan Acara

ke dalam diri kita
Use method and precautions of chain and chain rigging
Requirements for sling construction site
  • Use method and precautions of chain and c...
    20-09-15
    1. Before use, the working load and applicable scope of the chain rigging shall be clearly seen on the label. Overload use is strictly prohibited, and visual inspection of the chain rigging shall be carried out before use. 2. In normal operation, the hoisting Angle is the key affecting the load. The included Angle of the shadow part in the figure should not exceed 120 degrees at most, otherwise it will cause local overload of the chain rigging. 3. It is forbidden to use informal link between ...
  • Requirements for sling construction site
    20-09-01
    1. The construction site shall be equipped with enough spare slings of various sizes, which shall be hung at the specified place and put back to its original place after use.   2. Safety working load should be marked on the lute head of the sling, and the insertion rope sleeve should not be used.   3. Make a rope sleeve with a rope clip. The size of the rope clip must be in accordance with the size of the wire rope.   4. All spallers (including lifting rope, lifting lugs and sh...
Baca lebih lajut
WhatsApp Online Chat!